Today we’ll be building this awesome design spiral speakers! They look and sound absolutely brilliant! Is this best looking 3D printed speaker? Let me know in comments below.
These are know as spirula or Spirulida speakers design by Ondra Chotovinsky from Akemake. More info here https://www.behance.net/akemake
Parts and componets list:
Audio labs 4 inch (8ohm) Speakers — https://goo.gl/EVTZP4
Mini Bluetooth Amplifier without PSU — https://goo.gl/JoF1S4
Mini Bluetooth Amplifier with PSU — https://goo.gl/AVGnMF
Recommended 3D printer for this project: Creality Cr10S 3D printer (GEARBEST) — https://goo.gl/a12ggf
Creality CR10S 3D printer(BANGGOOD) — https://goo.gl/fB2KtB
WOOD/PURE Filament (You need at least 2 rolls 30% infill)
Aprintapro PURE Filament — https://goo.gl/N41Myy
Print time with simplified 3d is around 16 hours per one side enclosure at 30% infill.
With Cura 3.2.1 is around 24 hours as CURA is slice it with a lot more traveling.
Speaker STL files can be found here — https://bit.ly/2ILunso
Speaker seal ring — https://goo.gl/G4YREY
Speaker 3D printed spikes —
Music in video:
Ambient song in video: Envato Market Licensor’s Author
Username: FreeHands
Licensee: NexiTech
Item Title: Kyushu Sunset
Vocal samples from: — https://www.audioblocks.com/
Song: Disclosure – Latch (Ehrling Remix) (Vlog No Copyright Music) Music provided by Vlog No Copyright Music.
Video Link: https://youtu.be/VUZmwZ6aPVE
Song: Young Believer – Running Back to You ft.Kylé Music provided by Twin Pillars Records
Video Link: https://youtu.be/VPKF7u6-7P8
